Roman shades are a beautiful and classic window treatment option. They are available in a wide variety of colors and fabrics to match any decor, and they provide excellent light control.
Roman shades are also relatively easy to install, so even if you’re not an expert person, you can still do it yourself! Read on as we help you in installing roman shades without an expert’s help! Here’s a step-by-step guide on how to install Roman shades in your home.
What You Need Roman Shades at Home
Installing roman shades is a quick and easy way to upgrade any room in your home—no matter what your décor style may be. With just a few simple tools and supplies, you can achieve professional-looking results in no time at all!
Below are the things you need to prepare in installing roman shades, which you can readily get from your local hardware store in the neighborhood:
Pencil or pen
Scissors or box cutter
Drill with screwdriver attachment (or screwdriver)
1/4 inch drill bit (or size that is appropriate for the screws you are using)
Steps in Installing Roman Shades
What you will need is just keen eye for details and determination to make things done. Follow these six easy steps to install roman shades in your lovely home:
Step 1: Choosing the Right Roman Shades
Choose the right type of Roman shade for your window. There are three main types of Roman shades: balloon, flat, and hobbled. Balloon shades have gathered fabric that creates a balloon-like effect when the shade is raised.
Flat shades lay flat when raised and provide a clean, streamlined look. Hobbled shades have soft folds of fabric that give the shade a textured look.
Step 2: Measure the Windows
Measure your window correctly. When measuring for Roman shades, you will need to know the width of the window at three different points: the top, middle, and bottom.
Measure from one side of the window frame to the other at each of these points, and be sure to write down all three measurements. You will also need to know the desired length of the shade, so measure from the top of the window frame to where you want the bottom of the shade to fall.
Step 3: Cut the Headrail
Cut the headrail to size. The headrail is the horizontal piece at the top of the shade that will be mounted to the wall or window frame. Once you have your measurements, cut the headrail to size using a saw or power drill. If you are using a power drill, be sure to use a wood-cutting bit so that you don’t damage the headrail.
Step 4: Assemble the Hardware
Most Roman shades come with everything you need for installation, including brackets, screws, and mounting hardware. Follow the instructions that came with your shade kit to assemble all of the hardware.
Step 5: Install the Brackets
Once everything is assembled, it’s time to install the brackets that will hold up your Roman shade. The specific instructions will vary depending on what type of brackets come with your shade kit, but generally speaking, you will need to use screws or nails to secure the brackets into place on either side of your window frame or wall surface.
Step 6: Hang the Roman Shades
With the brackets in place, it’s time to hang your new Roman shade! First , insert the headrail into the brackets, making sure that the front edge of the headrail is facing outward .
Then, pull the cords or chains through the holes in the back of the headrail until they come out the front. Test the cords or chains by pulling on them gently. Take note that there should be some resistance, but normally, they should move smoothly . And that ’s it—you ’ve successfully installed your new Roman shade!
Installing roman shades is a quick and easy way to upgrade any room in your home—no matter what your decor style may be. With just a few simple tools and supplies, you can achieve professional-looking results in no time at all!